Depending on the product requirements, NPI can include planning for optical, electrical and environmental testing, together with verification, validation and quality-engineering activities.
FAQ’s
Engineering. Technology. Experience.
Fibernet can support sourcing and selection of lasers and light sources, optical and fiber amplifiers including EDFA, optical modulators and drivers, optical transceivers and data-communication modules, and passive optical components such as splitters, couplers, WDM devices, isolators and filters.
Fibernet supports FTTx broadband access networks, GPON deployments, optical distribution infrastructure and high-density fiber connectivity for telecommunications facilities and data centers.
Both variants support up to 4K@30Hz.
The datasheet specifies video resolution up to 4K@60Hz.
Up to 4K.
The datasheet specifies video resolution up to 4K for all KVM models.
LC Uniboot is an option for dense patching areas. The Fibernet datasheet states that its LC Uniboot design reduces cable volume by half compared with standard LC duplex patch cords at the same capacity.
An Optical Spectrum Analyzer (OSA) is used when the optical spectrum, wavelength distribution or spectral characteristics of a source or optical system must be measured and analyzed.
The datasheet lists FTTH and FTTD installations, FTTx distribution routes, data-center and ODF interconnections, and optical equipment connections in field environments. Suitability for a particular installation should be checked against its environmental and mechanical requirements.
The source positions it as a pocket-size on-the-go solution for presentations, meeting rooms and other situations where a computer must be connected to an external display.
The datasheet shows SEM-1 between an external controller and a Fibernet secure KVM, with keyboard and mouse connected to SEM-1 and a computer connected to the KVM.
The transmitter provides one RCA audio input and the receiver provides one RCA audio output.
The datasheet lists Tight Buffer, Loose Tube, Ribbon and Breakout cable constructions. The suitable construction depends on the intended routing and termination arrangement.
FC, SC, LC and LX 0.5 appear in the ordering table; E2000 appears in examples. The source does not specify an operating wavelength range. Confirm both connector availability and wavelength suitability with Fibernet.
The ordering table lists ST, FC, SC, LC, MU, E-2000 and LX 0.5 connector interfaces. Availability of each connector and polish combination should be confirmed when ordering.
The family is positioned for government, defense and other sensitive applications requiring channel isolation.
The patch-cord ordering table lists OM3, OM4, 62.5/125 multimode, G.657.A2 bend-insensitive single-mode and single-mode options. UPC and APC polish options are listed. Confirm the selected fiber, interface and polish combination before ordering.
The datasheet lists 50/125, 62.5/125, G.657.A2, 9/125, OM3 and OM4 fiber options. Selection should match the optical network and the splice or termination design.
FS-SKVM-41HD-KIT for four HDMI inputs and FS-SKVM-41DP-KIT for four DisplayPort inputs. Both provide one HDMI output.
Typical applications include defense and mission-critical systems, medical equipment, industrial systems, automation, photonics and other advanced systems requiring application-specific optical interconnects.
There are two variants: one with HDMI 1.4 input and one with DisplayPort input. Both provide HDMI 1.4 output.
Typical application areas include fiber optic systems, defense, medical systems and data-center or data-communication environments.
The datasheet lists insertion loss, back reflection, apex offset, radius of curvature, temperature range, vibration and cable-retention checks. Project-specific test reports and acceptance criteria should be agreed during specification.
The ordering guide lists ST, FC, SC and LC connector options, with UPC, APC or normal polish selections. The appropriate connector and polish combination should be confirmed for the target equipment.
Transmitter units are available with either HDMI input or DisplayPort input. Receiver-side video output is HDMI.
The platform supports H.264/AVC and H.265/HEVC encoding/decoding for streaming and interoperability with supported cameras, network media devices and third-party platforms.
Connector end-face contamination or damage can affect optical loss and measurement repeatability. Inspection and cleaning help ensure the connector interface is in suitable condition before testing or mating.
Once equipment has been installed or integrated into an operational environment, remediation may become more complicated. A pre-deployment inspection creates an additional opportunity to review the hardware before operational introduction.
The short single-mode section on the transmission leg produces a controlled, offset launch into the multimode fiber rather than a centered launch. It changes the launch condition; it does not convert the installed multimode link into single-mode fiber.