Supply Chain Risk Management is the systematic process of identifying, assessing and managing risks across the supply chain. Hardware Assurance can serve as one physical control within a broader SCRM program.
FAQ’s
Engineering. Technology. Experience.
Supply Chain Security refers to controls used to manage security risks associated with sourcing, manufacturing, distribution, transportation and introduction of products into an organization.
A fiber optic pigtail is typically terminated with a connector at one end and has a free fiber end intended for splicing or integration. A patch cord typically has connectors at both ends. Confirm the required assembly format in the project specification.
A PCB is the bare printed circuit board. A PCBA is the board after electronic components have been mounted and soldered.
A working prototype demonstrates product functionality. A production-ready product also requires repeatable assembly processes, controlled documentation, defined materials and suppliers, manufacturing tooling, test coverage, quality controls and a stable production flow.
Box build generally refers to assembling electronic and mechanical components into an enclosure. Turnkey manufacturing can cover a broader scope that may begin with BOM and procurement preparation and continue through sub-assembly manufacturing, system integration, verification and final product delivery.
Cross and direct are the connectivity choices listed in the Fibernet ordering table. Specify the required polarity based on the installed duplex link and confirm the mapping with the technical team before production.
FAV-103 is the Encoder (Tx) used on the source side. FAV-104 is the Decoder (Rx) used on the display/operator side. The decoder adds Multiview, background picture, video wall, multi-window overlay and OSD capabilities.
Prototype manufacturing demonstrates that the product can be built and function. NPI develops and validates the process required to manufacture, inspect and test that product consistently in an ongoing production environment.
The input connector and unit length differ. The HDMI model uses HDMI 1.4 input and is 48.7 mm long; the DisplayPort model uses DisplayPort input and is 57 mm long. Both output HDMI 1.4.
FAV-104 is the decoder/receiver endpoint in Fibernet's MVISION KVM over IP 4K@60 platform. It receives network AV/KVM streams from FAV-103 encoders and outputs video, audio and keyboard/mouse connectivity at the operator or display side.
Fiber BLOCKER KVM extender is Fibernet's secure KVM-over-fiber family for controlling one, two or four computers from a keyboard and mouse while maintaining isolated channels between systems.
The datasheet states ultra-low latency of less than 80 ms from signal source to display.
The datasheet lists a maximum insertion loss of 0.1 dB and connector repeatability with a loss increase below 0.1 dB.
SEM-1 is specified for operation from 0°C to +45°C and storage from -40°C to +90°C.
0°C to 50°C; storage is -20°C to 75°C.
SEM-1 is an external control interface for Fibernet secure KVM systems. It allows a third-party controller to send RS-232 commands to the KVM while keyboard and mouse remain connected through the SEM-1.
Top-Level Assembly is the manufacturing stage where multiple sub-assemblies, modules and components are integrated into the highest-level finished assembly or system.
Turnkey electromechanical assembly combines manufacturing preparation and supply-chain activities with the integration of electronic, electrical and mechanical components into a complete subsystem or finished product.
Turnkey manufacturing is a model in which one manufacturing partner manages multiple stages required to deliver the finished product. Depending on project scope, this can include procurement, manufacturing preparation, sub-assemblies, electromechanical integration, testing, top-level assembly and final product completion.
Wire harness manufacturing is the controlled process of preparing, terminating, routing and combining multiple wires or cables into a defined electrical interconnect assembly used within a product or system.
Fibernet combines fiber-optic infrastructure expertise, proprietary hardware-enforced cybersecurity and advanced multimedia technologies within a single technology portfolio.
This combination enables organizations to address physical network connectivity, secure workstation access, high-density fiber distribution and operational visualization through complementary solutions.
With engineering expertise and project-specific technical support, Fibernet helps customers select and integrate technologies according to their infrastructure, security and operational requirements.
The source lists PIP, image cropping, scaling, moving, roaming, window locking, background picture, presets and signal preview.
The datasheet lists a 10 Gbps multimode 850 nm SFP+ module rated to 300 m, plus LC/UPC optical cables in 20 m, 30 m and 100 m lengths.
The published specification states applications up to 1 W. The datasheet does not provide a wavelength-dependent power rating, so operating conditions should be confirmed with Fibernet before ordering.
The supported portfolio can include splitters, couplers, WDM components, isolators and optical filters, selected according to the optical architecture and performance requirements.
Four HDMI or DisplayPort inputs, one HDMI output, one 3.5 mm audio output, two USB-A ports and four USB-B PC connections.
Both units use 12 VDC and are specified at 5 W maximum power consumption per unit.
Confirm polarity, pinning, connector gender, polish type and the required fiber mapping. The May 2020 ordering information contains polish-designation inconsistencies, so the final part number should be verified.
Fibernet provides fiber-optic communication infrastructure, tactical fiber assemblies, hardware-enforced cybersecurity, secure KVM and KM solutions, command and control multimedia platforms and customized engineering and manufacturing services.
These capabilities support defense system integrators and organizations developing or operating mission-critical infrastructure.