The Build Your Order matrix lists G.657A2 bend-insensitive single-mode, OM3 bend-insensitive multimode and OM4 bend-insensitive multimode.
FAQ’s
Engineering. Technology. Experience.
The datasheet lists STAR400-1U, 1U FX, STAR400-2U and STAR400 4U as compatible platforms.
For detailed single-mode links, FS200 is suitable. For environments that require both multimode and single-mode testing, the FS300 Quad OTDR is the stronger fit because it combines both fiber types and supports OTDR, insertion-loss and reporting workflows.
Automated analysis supports IEC 61300-3-35 (2015), AT&T TP-76461, IPC-8497-1 and user-defined inspection criteria.
The source lists Standard Loss Cross, Low Loss Cross, Low Loss Cross with Pull Eye, Low Loss Direct, Low Loss Direct with Pull Eye and Standard Loss Direct.
The supplied source lists Normal, Fast and Fine measurement modes so the operator can adjust the measurement according to the application and line conditions.
The product is documented for MPO-8, MPO-12, MPO-16, MPO-24 and MPO-32 connectors, including single-row and multi-row connector formats.
Connector Type 1 supports MTP® Female or MTP® Male.
The ordering matrix supports MTP® Female or MTP® Male on either side of the patch cord.
The datasheet lists OLS8-QUAD for multimode and single-mode testing, OLS8-SM for 1310/1550 nm single-mode testing, and OLS8-XGS for 1310/1550/1490 nm XGS/PON-related testing.
The ordering matrix lists Standard, Low Loss and Ultra-Low Loss MTP® options.
The datasheet lists OPF2004, OPF2005, OPF2006 and OPF2007 for female/male pin exchangers in aqua and yellow.
The datasheet supports Direct and Crossed low-loss polarity options and describes Method-A polarity management with reversible polarity for field flexibility.
The ordering matrix lists APC and UPC.
The Build Your Order matrix lists UPC and APC polish options.
The ordering matrix lists UPC and APC polish options for each side.
The tool is intended for MTP® PRO connectors. On the Fibernet site, the MTP® PRO Patch Cord is the directly related product shown with this tool kit.
The datasheet lists CE marking, IEC/EN 61010-1, IEC/EN 61326-1, EN 55011, FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1, and RoHS 2 / RoHS 3 compliance.
The specification table lists 50/50, 40/60, 30/70, 20/80, 10/90, 5/95 and 1/99 coupling ratios, and states that other ratios are available on request.
The datasheet lists STAR400-1U, 1U FX, STAR400-2U and STAR400 4U as compatible platforms.
The datasheet lists STAR400-1U, 1U FX, STAR400-2U and STAR400 4U as compatible platforms.
The supplied datasheet lists MTP® to 8 LC with a rear TAP connection, MTP® to MTP® with a rear TAP connection, and MTP® to MTP® with a front TAP connection.
The built-in FID-30R power meter measures Traffic signals at 1310, 1490 and 1550 nm, as well as modulated Tone signals including 270 Hz, 330 Hz, 1 kHz and 2 kHz.
The OPM8 is calibrated at 850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1610, 1625 and 1650 nm.
The supplied datasheet states that the STAR400 uses an eight-fiber configuration intended to maximize fiber utilization and support migration across data rates up to 400G.
Contamination on the ferrule end face can contribute to optical loss and connection problems. The supplied One-Click™ cleaner documentation is designed around removing dust, grease and other contaminants from connector end faces.
The supplied Fibernet datasheet states that MTP® connectivity offers more than 12 times the density of standard connectors, helping reduce the space required for high-density fiber connections.
Yes. The listed One-Click™ cleaner variants in the supplied datasheet are stated as compliant with EU Directive 2011/65/EU and (EU) 2015/863 (RoHS2).
Yes. The product-family features state that the cleaners can clean both APC and PC connector end faces. Individual model compatibility still depends on the connector type.
Yes. The datasheet states that STAR modules can be installed and removed tool-free through either the front or rear access panels.