AFL specifies measurement accuracy of ±0.25 dB under the stated calibration and test conditions.
FAQ’s
Engineering. Technology. Experience.
The VFI4 High Power model has a published output power of 5 mW and a range of up to 10 km.
The STAR400 MTP® Module is an extractable high-density adapter module designed to provide MTP® connection points between trunks and harnesses for plug-and-play data center fiber systems.
The STAR400 MTP® to LC Module is a high-density pre-terminated 8-fiber module that transitions MTP® backbone or horizontal cabling to individually numbered LC ports for data center patching.
The STAR400 MTP® Trunk Cable is designed for high-density data center backbone and horizontal fiber distribution, with pre-terminated MTP® connectivity, strain-relief grips and installation pull-eye hardware.
The STAR400 TAP Module is designed to connect monitoring equipment to high-density fiber infrastructure while preserving a separate live-traffic path.
Wave ID allows the OLS8 to encode wavelengths so a compatible OPM8 can automatically identify and measure them. AFL states that up to three wavelengths can be tested simultaneously, reducing wavelength-setting errors and test time.
AFL lists enterprise LAN, data center, FTTH PON, high-power broadband, multimode and single-mode fiber networks as target applications.
It helps adapt standard loose-tube fiber cabling for use with the STAR Fusion Splice Module so the high-density solution can be installed and operated as intended.
The supplied datasheet specifies return loss of at least 55 dB.
Confirm fiber type, front adapter type, required live/TAP split ratio, TAP-port location and the exact ordering code. The supplied source contains an inconsistency between the split-ratio ordering matrix and its 70/30 example, so the final commercial part number should be verified before ordering.
Confirm fiber quantity, fiber type, connector types on both sides, polish, cable length, fanout lengths and the required low-loss/direct configuration. Also confirm whether the project requires a configuration above the 96-fiber Base-8 ordering matrix shown in the supplied document.
AFL lists data center installation, turn-up and troubleshooting, FTTx hardened-connector inspection, verification of connector-cleaning practices and multi-fiber or single-fiber connector inspection as applications.
The datasheet identifies data centers, high-density environments, storage area networks, communications rooms and data communication networks, and also references DRP, BCP and central data-center sites.
Choose TS100 when the priority is fast one-touch troubleshooting with minimal OTDR training. Choose FS200 when full single-mode OTDR trace analysis is required. Choose FS300 when both multimode and single-mode testing are needed in one platform.
The supplied Fibernet product-page text identifies standard loose-tube cables as the intended cable type.
The range includes MU/LC, MU/LC Mini, D-LC for duplex LC, and LC PRO. Select the model according to connector format and access conditions.
The supplied range includes the One-Click™ Cleaner MPO for MPO/MTP™ connectors, the MPO-16 for 16f/32f MPO connectors, and the MPO ESD for 12f/24f MPO or MTP® connectors.
The One-Click™ Cleaner SC and SC Mini are listed for SC/ST/FC connectors. The M250 is also listed for SC applications, while HOC supports TITAN/TRIDENT™/SC.
The ordering matrix lists no connection, ST, FC, SC Simplex, SC Duplex, LC Duplex, LC Simplex, LC Uniboot, LX 0.5, MTP® Female and MTP® Male.
Side 1 supports MTP® Female or MTP® Male. Side 2 can be No Connection, SC Duplex, LC Duplex, MTP® Female, MTP® Male or LC UniBoot according to the supplied ordering matrix.
The included 2.5 mm universal adapter accepts connectors such as FC, SC and ST. The VFI4 High Power version also includes a 1.25 mm universal adapter for LC and MU connectors.
The clamp head supports 250 µm single fiber through 3000 µm jacketed cord and up to 12-fiber ribbon without changing clamp heads.
The Build Your Order matrix lists 8, 12, 16, 24 and 48 fibers, plus 2×12F, 3×12F and 4×12F bundle options.
The datasheet lists qualifications and test-method compliance including TIA-568.3-E, TIA-526-7, TIA-526-14, IEC 11801, IEC 14763-3 and IEC 61280-4-1/-4-2, with encircled-flux conditions noted for some multimode tests.
The Build Your Order table lists OM3 bend-insensitive, OM4 bend-insensitive, OM5 bend-insensitive and G.657A2 bend-insensitive fiber.
The Build Your Order matrix lists OM4 bend-insensitive, OM5 bend-insensitive and G.657A2 bend-insensitive fiber options.
The supplied Build Your Order matrix lists G.657A2 bend-insensitive single-mode, OM3 bend-insensitive multimode, OM4 bend-insensitive multimode and OM5 bend-insensitive multimode.
The ordering matrix lists 50/125, 62.5/125, G.657A2 bend-insensitive single-mode, SM, OM3 bend-insensitive and OM4 bend-insensitive options.
The product description and features reference OM1, OM2, OM3, OM4 and single-mode. The Build Your Order matrix lists 50/125, 62.5/125, G.657.A2 bend-insensitive, OM3 bend-insensitive and OM4 bend-insensitive options.