STAR400 2U

The STAR400 2U is a modular, pre-terminated optical distribution frame for high-density data center fiber distribution. The source datasheet describes six pull-out trays, plug-and-play STAR modules and tool-free installation.

The published datasheet specifies six pull-out trays for easier access to cables, ports and patch cords.

The datasheet lists 36 modules. The mechanical drawing title states the enclosure is designed for up to 24 modules, which conflicts with the datasheet and should be resolved by Fibernet Engineering before publication of a definitive maximum.

The datasheet lists 288 fibers in the LC-MTP® configuration and 1,152 fibers in the 4×MTP®-MTP® configuration, calculated at 12 fibers per MTP connector. The older introductory paragraph says up to 288 fibers, so the public page should present the detailed specification values while flagging the source inconsistency for QA.

Yes. The published specification table lists a 4×MTP®-MTP® module option with 92 MTP ports and 1,152 fibers.

Yes. The datasheet states that the design supports tool-free installation to reduce installation time and cost.

Front, rear and side access, pull-out trays, built-in labeling and cable-management features are intended to make moves, adds and changes faster and easier.

Yes. The datasheet states that optimized use of Uni-Boot patch cords can reduce cable volume by 50%.

The source references EIA-310 D and provides optional brackets for 21-inch and 23-inch racks. The mechanical drawing is based on a 19-inch rack format.

The datasheet lists 482.8 mm width and 530 mm depth. The mechanical drawing shows an 88.90 mm (2U) height and additional body dimensions. The datasheet specification table incorrectly prints 1U for height, so the mechanical drawing should be treated as the controlling dimensional reference pending Engineering confirmation.