LC UNIBOOT

A compact duplex LC fiber patch cord that carries two fibers in a single 2 mm cable, reducing cabling volume while enabling field-reversible polarity and easier access in densely loaded panels.

Dense fiber panels can become difficult to route, identify and service when conventional duplex patch cords consume too much pathway space. The Fibernet LC Uniboot design places two fibers into one 2 mm patch cord, reducing cable volume while maintaining duplex LC connectivity.

The product also supports field-reversible polarity and custom identification through colored latches and sleeve labels, helping technicians perform faster moves, adds and changes in high-density environments.

Choose Configuration

OM3 1 m Reversible LC Uniboot

Part NumberFUO-9999UU0010

Duplex Uniboot Optical Patch Cord with two fibers in a single jacket. Multimode OM3 50µm Bend-Insensitive fiber, terminated on both ends with duplex LC-Uniboot connectors featuring reversible polarity, factory UPC polished, 1 meter in length. Available in 12 identification colors according to project requirements.

Fiber Count
2fibers
Fiber Type
OM3 50µm Bend-Insensitive
Connector
LC Uniboot Duplex, both ends
Polarity
Field-reversible
Polish
UPC
Length
1m
Identification Colors
12colors
Standard
TIA/EIA-604-10

Additional Length Item

Additional 1-meter length for the OM3 50µm Bend-Insensitive patch cord, in accordance with the standard.

Reduce Cable Congestion

A single 2 mm cable carries both fibers, with the datasheet stating up to 50% cabling-volume savings.

Reverse Polarity in the Field

Reversible polarity supports quicker MAC work without replacing the patch cord when the required A/B orientation changes.

Improve Serviceability

A compact connector design and latch pull-tab option help technicians access densely loaded LC panels without special tools.

Identify Connections Faster

Colored latches and custom sleeve labeling support clearer network identification and maintenance workflows.

Fiber Options

50/125
62.5/125
G.657.A2 B.I.
OM3 B.I.
OM4 B.I.

Connector / Polish / Polarity Options

LC / Reversible LC
UPC
APC
Cross Polarity
Direct Polarity
Custom Cable Length
Pull Tab Option

Latch Color Options

Yellow
Red
Purple
Dark Purple
Orange
Violet
Beige
Black
Blue
Green
Lime Green
Aqua

Ordering example: FUG-9999UU0010-R — OM4 bend-insensitive fiber, LC-LC on both sides, UPC/UPC, 1 m cable length, Cross polarity, Red latch.

LC Uniboot reversible patch cord ordering matrix for fiber type, connector, polish, length, polarity and latch color
Parameter Multimode Single-Mode
LC Connection Insertion Loss 0.1 dB typical; 0.15 dB maximum 0.1 dB typical; 0.15 dB maximum
Connector Repeatability – Loss Increase <0.1 dB <0.1 dB
Fiber Attenuation <3.0 dB/km @ 850 nm <0.35 dB/km @ 1310/1550 nm
Fiber Max. Bending Radius 7.5 mm 7.5 mm max.
Cable Max. Bending Radius 10 mm 7.5 mm max.
Operating Temperature -20°C to +70°C -20°C to +70°C
Cable Retention 60 N 60 N
Connector Retention 60 N 60 N
Temperature Cycling – Insertion Loss Variation <0.1 dB <0.1 dB
Vibration – Insertion Loss Variation <0.1 dB <0.1 dB
Retention – Insertion Loss Variation <0.1 dB <0.1 dB

The source datasheet prints return-loss values with negative-sign notation. Those values are intentionally not reproduced in this production table until Fibernet Engineering confirms the intended published notation.

Construction & Quality

  • All-dielectric cable construction.
  • LSZH-FR / HFFR cable jacket.
  • Custom sleeve labeling.
  • Colored latches for network identification.
  • IL/RL and ferrule-geometry testing for every fiber.
  • Short connector construction for improved flexibility and space savings.

Data Centers

Dense LC duplex patching where pathway space, accessibility and polarity management matter.

High-Density Environments

Panels and cabinets where reduced cable bulk improves routing and technician access.

Storage Area Networks (SAN)

Compact duplex fiber patching for storage-network connections.

Communications Rooms

LC duplex interconnects requiring organized labeling and serviceability.

DRP / BCP Infrastructure

The datasheet cites deployment in disaster recovery, business continuity and central data-center sites.

The supplied datasheet references the following standards and compliance families:

IEEE 802.3ae · 10 Gb/s
IEC 60793-2-10
ITU-T G.657.A2
TIA-604-10 · LC FOCIS 10
IEC 61754-20
TIA-568-C.3
IEC 60793-1
IEC 61755-3
IEC 11801
TIA 492.AAAC
TIA 492.AAAD
TIA 942-1
UL94-V-0
IEC 60332-3C
IEC 60754-2
IEC 61034
RoHS

Frequently Asked Questions