8-Port GPON PoE ONT

Connect Eight IP Devices Through a Single GPON Access Terminal

8-port GPON PoE ONT for Passive Optical LAN with 8 Gigabit RJ45 interfaces, PoE capability, VLAN and QoS management.

The Challenge and the Product Solution

The Challenge

Connect Eight IP Devices Through a Single GPON Access Terminal

A cluster of IP phones, cameras or other powered Ethernet devices needs local port density, suitable power allocation and managed GPON services. The optical design must match the number and requirements of the attached endpoints.

The Product Solution

The 8-Port GPON PoE ONT combines one GPON optical interface and eight Gigabit RJ45 ports. Its datasheet specifies up to 60 W capability per port, subject to confirmation of the overall simultaneous PoE budget, along with VLAN and QoS support.

Technical suitability depends on the access topology, endpoint requirements and the supplied manufacturer specification. Review the optical and service design before deployment.

Translate documented technical features into deployment decisions for the teams selecting, installing and operating the optical network.

For Network Designers

Plan an access location serving up to eight Ethernet-connected IP devices.

For Integrators

Size the device power supply and PoE loads with the confirmed aggregate power budget, rather than multiplying individual port maxima.

For Operators

Assess VLAN, QoS, multicast and the documented management features for the required access service.

Interface / Function Documented capability
GPON interface 1 × SC/APC connector, single-mode fiber
GPON line rates 2.488 Gbps downstream / 1.244 Gbps upstream
Ethernet 8 × 10/100/1000BASE-T RJ45
PoE capability Up to 60 W per port according to datasheet; aggregate budget not confirmed
PoE standards IEEE 802.3af/at; 802.3bt marked pre-standard
Power Adapter / external battery backup options
Parameter Specification
GPON interface 1 × SC/APC connector, single-mode fiber
GPON line rates 2.488 Gbps downstream / 1.244 Gbps upstream
Ethernet 8 × 10/100/1000BASE-T RJ45
PoE capability Up to 60 W per port according to datasheet; aggregate budget not confirmed
PoE standards IEEE 802.3af/at; 802.3bt marked pre-standard
Temperature 0°C to +40°C
Dimensions 160 × 220 × 34 mm
Management OMCI, CLI, Telnet
Traffic control IEEE 802.1p QoS, IEEE 802.1q VLAN, IGMP snooping
Power Adapter / external battery backup options

These pages reproduce capabilities from the supplied datasheets. Check product availability, revision, optical budget, OLT/ONT interoperability and software/feature licensing for each project.


Engineering check:

The datasheet lists up to 60 W capability at each individual port but does not establish the simultaneous aggregate PoE budget. IEEE 802.3bt is identified as pre-standard.

Typical considerations and use cases described in the source. Final selection remains subject to project requirements.

  • Clusters of enterprise IP cameras
  • IP phones and powered network terminals
  • Campus and enterprise Passive Optical LAN networks
  • FTTH and other GPON access installations

The ONT terminates a GPON optical connection at the network edge and provides local Ethernet ports. Optical budgets, power delivery and service provisioning depend on project design.

Illustrative PON network only. This diagram does not establish compatibility of specific OLT and ONT models, optical budget or performance.

The datasheet lists up to 60 W capability at each individual port but does not establish the simultaneous aggregate PoE budget. IEEE 802.3bt is identified as pre-standard.

Consolidate endpoint connectivity

Provide eight local Ethernet connections from one optical terminal.

Connect powered IP equipment

The PoE specification addresses devices such as IP phones and IP cameras.

Control Ethernet services

The source lists VLAN tagging, QoS and IGMP snooping.

Deployment flexibility

Desktop, wall and cubicle-wall mounting options are specified.

8 × Gigabit Ethernet

Up to 60 W / Port*

VLAN & QoS

SC/APC GPON

Frequently Asked Questions