Outdoor GPON PoE ONT

Connect Outdoor IP Devices Through a GPON Fiber Access Link

Outdoor GPON PoE ONT with one Gigabit Ethernet PoE+ port for IP cameras and wireless access points. SC/APC fiber uplink and -30°C to +60°C operation.

The Challenge and the Product Solution

The Challenge

Connect Outdoor IP Devices Through a GPON Fiber Access Link

Outdoor IP cameras and wireless access points need reliable Ethernet connectivity, suitable operating temperatures and local device power. Conventional placement can be constrained by equipment locations and cabling design.

The Product Solution

The Outdoor GPON PoE ONT provides one Gigabit Ethernet port with PoE+ from a GPON optical connection. It supports installations in a standard outlet box and operates over the -30°C to +60°C temperature range documented in the datasheet.

Technical suitability depends on the access topology, endpoint requirements and the supplied manufacturer specification. Review the optical and service design before deployment.

Translate documented technical features into deployment decisions for the teams selecting, installing and operating the optical network.

For Network Designers

Terminate a GPON access connection close to a compatible IP camera or wireless access point with a single Gigabit Ethernet output.

For Installers

Plan wall or outlet-box mounting and remote power from the documented connector format and enclosure dimensions.

For Operators

Evaluate IEEE 1588v2 capability and the management functions listed in the product specification for the intended network.

Interface / Function Documented capability
Optical uplink 1 × GPON, SC/APC single-mode fiber
GPON line rates 2.488 Gbps downstream / 1.244 Gbps upstream
Ethernet 1 × 10/100/1000BASE-T
PoE IEEE 802.3af/at, up to 30 W on the Ethernet port
Power input 30–60 V DC via Phoenix connector
Parameter Specification
Optical uplink 1 × GPON, SC/APC single-mode fiber
GPON line rates 2.488 Gbps downstream / 1.244 Gbps upstream
Ethernet 1 × 10/100/1000BASE-T
PoE IEEE 802.3af/at, up to 30 W on the Ethernet port
Operating temperature –30°C to +60°C
Dimensions 85 × 72 × 30 mm
Power input 30–60 V DC via Phoenix connector
Network management OMCI, CLI, Web, Telnet
Synchronization IEEE 1588v2 capable
Standards ITU-T G.984.x; ITU-T G.988 OMCI

These pages reproduce capabilities from the supplied datasheets. Check product availability, revision, optical budget, OLT/ONT interoperability and software/feature licensing for each project.

Typical considerations and use cases described in the source. Final selection remains subject to project requirements.

  • Outdoor IP camera connectivity
  • Wireless access-point connectivity
  • Enterprise Passive Optical LAN deployments
  • Optical-network connectivity in space-constrained enclosures

The ONT terminates a GPON optical connection at the network edge and provides local Ethernet ports. Optical budgets, power delivery and service provisioning depend on project design.

Illustrative PON network only. This diagram does not establish compatibility of specific OLT and ONT models, optical budget or performance.

Fiber connectivity at the network edge

Connect a local Ethernet endpoint through a single-mode GPON optical uplink.

Data and power from one edge terminal

Support a compatible powered device through the integrated PoE+ Ethernet port.

Installation-focused design

Wall mounting or installation inside a suitable outlet box, with a remote-power Phoenix connector.

Remote operations support

OMCI, CLI, Web and Telnet interfaces are listed in the technical specification.

1 × Gigabit Ethernet

PoE+ Output

-30°C to +60°C

SC/APC GPON

Frequently Asked Questions