Customer Premises Fiber Socket
A clean finish for every FTTH connection. Fibernet's wall-mounted optical outlet provides a dedicated termination point with configurable SC simplex or LC duplex adapter interfaces.
The last fiber connection needs a defined place.
At the customer premises, the drop fiber requires a recognizable optical termination point. Adapter selection, fiber count and access to the connection should be specified as part of the same outlet configuration.
Which interface will the subscriber actually use?
The connection type and number of terminations must match the installation plan. A wall plate alone does not resolve those choices.
Specify the outlet around the connection.
The FHS-DS ordering family provides choices for optical adapter, shutter, fiber terminations, pigtail inclusion and polish type in a compact wall-mounted format.
A clear hand-off at the subscriber wall.
The socket forms the optical connection point between the installed FTTH fiber and the customer-side connection.
Conceptual fiber path – not an electrical or optical conversion diagram.
Choose the connection details before ordering.
The product’s ordering table defines five selection dimensions. Treat them as a configuration guide, subject to confirmation of supported combinations.
SC or LC
SC simplex and LC duplex adapter types appear in the documented order options.
Shutter selection
Specify no shutter, an internal shutter or an external shutter.
Termination quantity
Choose a one-, two- or four-fiber termination option according to the planned connection.
With or without
The order matrix distinguishes configurations that include a pigtail from those that do not.
UPC or APC
Select the appropriate connector polish in coordination with the mating optical interface.
FHS-DS…
The full product code depends on the chosen options. Confirm the final part number before release.
Configuration note: the datasheet lists possible fields, but does not confirm every combination of adapter type, termination count, shutter and polish.
Documented product details.
Only the specifications visible in the supplied source have been included. Dimensions are referenced from the original mechanical drawing.
| Product | Customer Premises Fiber Socket |
| Installation | Wall-mounted; FTTH subscriber connection |
| Adapter options | SC simplex or LC duplex |
| Shutter choices | None, internal or external |
| Fiber terminations | 1, 2 or 4 options in ordering matrix |
| Pigtail choice | Yes / No |
| Polish | UPC / APC |
| Face dimensions | 86 × 86 mm, per drawing |
| Order-code prefix | FHS-DS |
Two optical interfaces. One installation decision.
Select the adapter family for the customer connection, then confirm the associated shutter, termination and polishing requirements.
SC Simplex
A single SC adapter interface, listed in the ordering matrix. Appropriate when the planned subscriber connection uses SC termination.
LC Duplex
An LC duplex adapter option for installations specifying LC connectivity. Confirm the relevant fiber count and configuration before ordering.