24-Port GPON PoE ONT GR240P

Increase Local Ethernet Port Density Without Losing Power-Budget Control

24-port GPON PoE+ ONT GR240P, 19-inch rackmount, with Gigabit RJ45 ports, 390 W aggregate PoE budget and OMCI support.

The Challenge and the Product Solution

The Challenge

Increase Local Ethernet Port Density Without Losing Power-Budget Control

Large numbers of connected IP devices create demand for rack-mounted access ports and centrally planned power delivery. A solution must address both the number of Ethernet interfaces and the aggregate PoE consumption.

The Product Solution

The GR240P provides 24 Gigabit Ethernet ports with PoE/PoE+, housed in a standard 19-inch rack format. Its documented total PoE budget is 390 W, with up to 30 W capability on an individual port.

Technical suitability depends on the access topology, endpoint requirements and the supplied manufacturer specification. Review the optical and service design before deployment.

Translate documented technical features into deployment decisions for the teams selecting, installing and operating the optical network.

For Network Designers

Use 24 RJ45 Gigabit interfaces where many edge endpoints need access in one communications cabinet.

For Installers

Fit the 19-inch chassis into rack plans and allow for its documented power and thermal requirements.

For Operations and Procurement

Apply the explicit 390 W overall PoE allowance during power-budget calculations and equipment selection.

Interface / Function Documented capability
GPON uplink SC/UPC single-mode fiber
GPON line rates 2.488 Gbps downstream / 1.244 Gbps upstream
Ethernet 24 × 10/100/1000BASE-T RJ45
PoE IEEE 802.3af/at; max. 30 W per port, 390 W aggregate
Power consumption 415 W maximum
Manufacturer model BFW Tbit-GR240P
Fibernet ordering code FGPON-ONT-24POE-L
Parameter Specification
Manufacturer model BFW Tbit-GR240P
Fibernet ordering code FGPON-ONT-24POE-L
GPON uplink SC/UPC single-mode fiber
GPON line rates 2.488 Gbps downstream / 1.244 Gbps upstream
Ethernet 24 × 10/100/1000BASE-T RJ45
PoE IEEE 802.3af/at; max. 30 W per port, 390 W aggregate
Power consumption 415 W maximum
Operating temperature –5°C to +45°C
Physical size 440 × 225 × 44 mm
Management OMCI and CLI; QoS/VLAN/IGMP support

These pages reproduce capabilities from the supplied datasheets. Check product availability, revision, optical budget, OLT/ONT interoperability and software/feature licensing for each project.


Engineering check:

The 390 W aggregate PoE budget limits concurrent port loading. A maximum of 30 W per individual port does not mean 30 W on all 24 ports simultaneously.

Typical considerations and use cases described in the source. Final selection remains subject to project requirements.

  • Communications closets in GPON access networks
  • Multi-device PoE Ethernet distributions
  • Enterprise Passive Optical LAN access
  • Cabinet-based optical-to-Ethernet conversion

The ONT terminates a GPON optical connection at the network edge and provides local Ethernet ports. Optical budgets, power delivery and service provisioning depend on project design.

Illustrative PON network only. This diagram does not establish compatibility of specific OLT and ONT models, optical budget or performance.

The 390 W aggregate PoE budget limits concurrent port loading. A maximum of 30 W per individual port does not mean 30 W on all 24 ports simultaneously.

High local port density

Connect up to 24 compatible Ethernet devices through a single GPON ONU.

Defined PoE budget

Plan connected PoE load against the documented 390 W aggregate limit.

Structured rack deployment

Fit the unit within a standard 19-inch communications cabinet.

Service-aware traffic handling

The datasheet lists VLAN, QoS and multicast support.

24 × Gigabit Ethernet

390 W PoE Budget

Up to 30 W / Port

19-Inch Rack

Frequently Asked Questions